Ethics & Sustainability

The Faith Guitars team recognise the importance of an ethical and sustainable manufacturing process, and we are conscious that this concerns many of our current and future players.

Our Workshops:
Faith Guitars are made in West Java, Indonesia using many hand-building and hand-finishing techniques that deliver the quality you have come to expect.
All workshops are climate controlled to the appropriate level depending upon the particular process taking place in that location.
Staff are looked after well, with training and high retention levels. Indonesian legislation ensures that any weekend or overtime work is paid at a higher rate, with regular hours being 8am till 5pm, 5 days per week.

The Faith Guitars team are in constant contact with our workshops and make frequent visits, plus invite our international distributors to visit with us to see production in process, and to inspect for themselves.  We are confident that the conditions and ethics of these locations meet the high standards we expect.

The Tonewoods:  
The Spruce is Engelmann Spruce from North America or Canada and bought through large US or Canadian tonewood merchants. The Spruce / Cedar tops will be from FSC Certified sources.

The Mahogany timber is sourced through an Indonesian merchant company who has FSC certification. *(FSC No: C104083)

The Rosewood, Trembesi and Ebony is all from Java or Makassar, and has been sourced through local, government approved timber merchants using the government approved timber certification process. This also reduces the miles travelled by the tonewoods before manufacture.

The timber is certified as legally obtained and government approved, and is supplied to the workshops, fully itemised and in plank form – before being cut and spliced in house once it has fully dried and matured.

Information for Vegans:
Like 99% of traditional guitar builders, we use traditional Hide Glue (made of animal hide) for fixing the end of the fingerboard to the body. The hide glue is used as it makes it possible to remove the glue with heat if the neck were ever to need removing. This glue is purchased from US guitar luthier merchants.
Also, the rosette inlays around the soundhole are made from Abalone, and the logos are Mother of Pearl. 
In both cases, these materials are a by-product of the fishing industry and originate in either Australia or New Zealand. 

Yes we do... but only to fix the fingerboard to the neck. On all other joints, Faith Guitars use regular white glue.

For centuries, animal hide glue has been used in the construction of musical instruments, and is still thought by many to be the best choice for an authentic finish.